We are currently hiring experience personnel for concrete form installers/setters and concrete finishers for the Dallas/Ft Worth areas.
Experience personnel must have a minimum of 5 years of knowledge and know proper grade. Concrete form setters will need to know how to measure (to the 1/8\") and cut materials to build forms for pouring concrete to construct curbs, walls, walkways, planters, spas, swimming pools and decks. Candidates must have extensive knowledge working with decorative foam and stamping for apartment complexes as the majority of the work will be for such sites.
Job Duties and Task:
·     Check the forms that hold the concrete to see that they are properly constructed.
·     Set the forms that hold concrete to the desired pitch and depth, and align them.
·     Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.
·     Mold expansion joints and edges, using edging tools, jointers, and straightedge.
·     Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.
·     Produce rough concrete surface, using broom.
·     Operate power vibrator to compact concrete.
·     Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
·     Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill.
·     Wet concrete surface, and rub with stone to smooth surface and obtain specified finish.
·     Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.
·     Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
·     Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.
·     Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.
·     Spread roofing paper on surface of foundation, and spread concrete onto roofing paper with trowel to form terrazzo base.
·     Build wooden molds, and clamp molds around area to be repaired, using hand tools.
·     Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.
·     Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern.
·     Waterproof or restore concrete surfaces, using appropriate compounds.
·     Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete and/or pattern or stamp the surface to provide a decorative finish.
·      Apply muriatic acid to clean surface, and rinse with water.
·     Push roller over surface to embed chips in surface.
·      Polish surface, using polishing or surfacing machine
·         Updated Resume
·       &#160; 6 years experience
·         Tools for the trade
·         2 forms of ID
·         Dependable transportation
·         Able to pass E-Verify
·         Able to pass a pre-employment drug screen
·         Pass a pre-employment drug screen
Concrete Finishers,Concrete Pour/Finishers
• Post ID: 41795389 northdfw